Included in the set:

• 1x crib clamp with screw

• 1x large fastening nut

• 2x straight pole pieces
  

• 1x curved top piece with hook (for attaching the mobile or music box)
  
  
  
  

  Assembly Instructions:

  Step 1 – Prepare the crib clamp

  • Take the clamp with the screw.

  • Place it onto the crib rail so that the flat plate is inside the crib and the screw part stays on the outside.

  Step 2 – Secure the clamp

  • Screw the large plastic nut onto the clamp thread.

  • Tighten until the holder is stable. (Do not overtighten – it just needs to be secure without wobbling.)
    
    
    
    

  Step 3 – Assemble the poles

  • Connect the two straight poles together until they click.

  • Insert the bottom end of the assembled pole into the clamp.
    
    

  Step 4 – Add the curved pole

  • Attach the curved pole piece to the top of the straight pole.

  • Ensure the connection locks in place firmly.

  Step 5 – Attach the top piece

  • Place the top piece with the hook on the end of the curved pole.

  • This is where you can hang the mobile or a music box.
    
    
    

  Step 6 – Final check

  • Make sure the whole structure is stable.

  • Shake it gently – if it holds firmly, the holder is ready for use.
    
    
    

  ---

  Safety Recommendations:

  • Check regularly that the clamp is tight and the poles are securely connected.

  • Do not install the mobile directly above the baby’s head – place it slightly to the side.

  • Remove the mobile when the baby starts to pull up or can reach the mobile.